Tag Archives: Challenge Coin Holder

Walnut Naval Flight Officer (NFO) Wings Challenge Coin Holder for Approx 50 Coins

Walnut Naval Flight Officer (NFO) Wings Challenge Coin Holder for Approx 50 Coins   nfo coin holder Walnut Naval Flight Officer Wings Challenge coin Holder. Made from 3/4 walnut with Wings cut from a 1/8″ thick contrasting wood. This coin holder holds approx 50 coins based on 1 3/4″ average coin size. It measures approximately 18″ long by 5″ deep by 6″ high  

Leave a Comment

Filed under Mike Fehring's Artistry In Wood

Custom Seabee’s Walnut Challenge Coin Holder for 50 coins

Custom Navy Seabee Walnut Challenge Coin Holder for 50 coins. seabee challenge coin holder

Leave a Comment

Filed under Mike Fehring's Artistry In Wood

Custom Walnut Challenge Coin Holder

After seeing my AV-8B and Aviation Ordnance Wings challenge coin holders a friend asked if I could make him a custom one with the five aircraft he had worked on between 1979 and 2012.  Here is the result.  Contains the following aircraft (A-7E, A4M, F-35, AH-1W and AV-8B.) Multiplane Challenge Coin Holder  

Leave a Comment

Filed under Mike Fehring's Artistry In Wood

Naval Aviator Challenge Coin Holder

Here is the next in my  custom challenge coin holders for all my Naval Aviator friends . Also made from 3/4″ walnut. The slots are cut a a 12 degree angle with the back slot 1/4″ wide to hold some of the thicker coins. The number of coins is based on the average coin being approx 1 3/4″. The face is beveled at 30 degrees. Naval Aviator Challenge Coin Holder  

Leave a Comment

Filed under Mike Fehring's Artistry In Wood

Aviation Ordnance Wings Challenge Coin Holder

Here is my second custom challenge coin holder for my Aviation Ordnance Brothers and sisters. This one is made of 3/4″ walnut. It is 18″ long x 5 1/4″ wide x 6 1/2″ tall and holds 50 coins. The slots are cut a a 12 degree angle with the back slot 1/4″ wide to hold some of the thicker coins. The number of coins is based on the average coin being approx 1 3/4″. The face is beveled at 30 degrees.
Aviation Ordnance Wings Challenge Coin Holder approx 50 coins.

Aviation Ordnance Wings Challenge Coin Holder approx 50 coins.

 

Leave a Comment

Filed under Mike Fehring's Artistry In Wood

AV-8B Challenge Coin Holder

Started working on making some custom challenge coin holders. Here is the first one. for AV-8B's. This one is made of 3/4" walnut. It is 18" long x 5 1/4" wide x 6 1/2" tall and holds 50 coins. The slots are cut a a 12 degree angle with the back slot 1/4" wide to hold some of the thicker coins. The number of coins is based on the average coin being approx 1 3/4". The face is beveled at 30 degrees.
AV8B Challenge Coin Holder/Desk Clock

AV8B Challenge Coin Holder/Desk Clock

 

Leave a Comment

Filed under Mike Fehring's Artistry In Wood